The Velcro principle consists of two different straps that claw into each other. One of these bands is sewn to the back of the LED strip. The other band is included in the set in sufficient length. This ribbon can be sewn onto any fabric. For this purpose, each of our sets comes with pins for fixing and a sailing needle. Of course, all needles are made of stainless steel so that you can continue to use them on board. Of course, the tape can also be stapled to wood, for example, or attached to smooth surfaces with double-sided adhesive tape.
On the side of the LED strip, about 15cm of cables with a waterproof connector protrude. The 4 meter long cable is screwed to this, which has a plug for the cigarette lighter on the other side. The dimmer has a supply cable one meter long, so that 5 meters are available with a dimmer.
Basically yes, but as the cleanest solution we recommend using a Y-splitter cable with the appropriate waterproof connectors. Please inquire if necessary.
Yes, we would be happy to make you an offer for your needs. Just let us know what you want, we will then present you with an implementation concept.
KLETT LED is supplied in a practical deep-drawn EVA pack. A zipper protects against loss of the individual parts. The pack can be hung on the loop.